HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 59 Error Codes — Part Code 6805 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3EInstall necessary PCBs.Install necessary PCBs.86596805
3ECorrect the cache resource
number (CLPR No.), and then
retry the operation. If this
problem persists, call HP
technical support.
An invalid cache resource
number (CLPR No.) was
detected.
550096805
3ECorrect the storage resource
number (SLPR No.), and then
retry the operation. If this
problem persists, call HP
technical support.
An invalid storage resource
number (SLPR No.) was
detected.
550106805
3ESpecify the number of CLPRs
within the valid range.
The maximum number of
CLPRs that can be created
was exceeded.
552096805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The Block Option setting is
incorrect.
552106805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The Donot Block (Volume
Level) option setting is
incorrect.
552116805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The options Block Option and
Donot Block (Volume Level)
cannot be specified at the
same time.
552126805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The Level 1 Threshold setting
is incorrect.
552136805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The Level 2 Threshold setting
is incorrect.
552146805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The Level 1 SIM setting is
incorrect.
552156805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The Level 2 Suspend setting
is incorrect.
552166805
5ESpecify the number of SLPRs
within the valid range.
The maximum number of
SLPRs that can be set was
exceeded.
552176805
5WCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The Level 1 Sleep setting is
incorrect.
552186805
Remote Web Console Error Codes 343