HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 58 Error Codes — Part Code 6610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WReduce the number of data
volumes and retry the
operation. When the number
of volume pairs has already
reaches the maximum value,
you cannot create volume
pairs any further.
The number of data volumes
exceeds the maximum.
690196610
0WCheck the number of
registered EXCTG.
Journal groups cannot be
added to the extended
consistency group (EXCTG),
because the number of
EXCTG exceeds the
maximum.
690216610
0iTo continue the operation,
click [OK].
Otherwise, click [Cancel].
Do you want to release the
remote command device from
the mirror?
690846610
Table 59 Error Codes — Part Code 6805
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
50996805
3EIf the problem persists despite
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
60126805
3WIf this problem persists, call
HP technical support.
The SVP is busy. Please wait
for a while, and then retry the
operation.
60236805
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
70606805
2EIf the error occurs after
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
71116805
0EIf the error occurs after
retrying, call HP technical
support.
This error code is not
registered.
73106805
3ERetry the operation. If the
same problem persists despite
retrying, call HP technical
support.
A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
80016805
3ECall HP technical support.The configuration could not
be changed.
81106805
2ERetry the same operation
several times. If this problem
persists, call HP technical
support.
The subsystem status is
invalid. Call HP technical
support.
83106805
342 Remote Web Console for Storage System Messages and Error Codes