HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 58 Error Codes — Part Code 6610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2ECall HP technical support.An error occurred in client
logic.
73036610
2EIf the error occurs after
retrying, call HP technical
support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
74406610
5WClick [Refresh], and retry.The system cannot apply the
new configuration. Do you
want to refresh?
81016610
5WCheck the port type, and then
change cable connections.
Exchange the channel cable
connections after
confirmation of the port type.
90066610
0WClick [OK].SIMs of XP Continuous
Access Journal and Universal
Replicator for Mainframe are
cleared.
90086610
0iClick [OK].The export is complete.90096610
5WTo continue processing, click
[Yes]. If the processing
finishes, reconfigure the port
that is not in operation.
The Port Setting process has
not completed. Do you want
to continue for other ports?
90216610
5WEnsure that the associated
channel paths are offline.
Are you sure you want to
exchange the specified ports?
Confirm the associated
channel paths are off-line.
90246610
5WRemove remote copy paths
that are associated with the
ports.
Are you sure you want to
switch the ports? If the remote
copy paths exist on the ports,
delete them beforehand.
90256610
5WTo continue to change ports,
click [OK].
Are you sure you want to
switch the ports?
If any remote copy paths exist
on the ports, delete them
beforehand.
Also, to avoid the switching
operation from being
reported as a failure, confirm
first that a message
prompting you to change the
channel cable connections is
displayed, and then perform
the necessary changes.
90266610
0iTo close the window, click
[OK]. Otherwise, click
[Cancel].
Do you want to exit?91006610
0iTo cancel the operation, click
[OK].
Do you want to cancel?91016610
0iTo apply settings in the
Preview list to the disk
storage system, click [OK].
Do you want to apply?91026610
332 Remote Web Console for Storage System Messages and Error Codes