HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 56 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the LDKC number for
the specified data volume,
and specify only one LDKC
number.
There are two or more LDKC
numbers for the specified
data volume. In this
operation, specify only one
LDKC number.
690186510
0WReduce the number of data
volumes and retry the
operation. When the number
of volume pairs has already
reaches the maximum value,
you cannot create volume
pairs any further
The number of data volumes
exceeds the maximum.
690196510
0iTo continue the operation,
click [OK].
Otherwise, click [Cancel].
Do you want to release the
remote command device from
the mirror?
690846510
Table 57 Error Codes — Part Code 6605
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565246605
Table 58 Error Codes — Part Code 6610
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WSpecify the data that you
want to register in the SVP,
and retry the operation.
The displayed information
has not been changed.
50306610
0WCheck the contents, and retry.The Operation value is
invalid. Specify the correct
value.
51376610
0WCheck the contents, and retry.The value specified for
Gathering Interval is invalid.
Specify a valid value within
the range of 1 to 15.
51386610
0WSpecify the correct CU
number.
The specified CU number is
incorrect. Specify the correct
CU number.
51406610
0WSpecify the correct device
number.
The specified LDEV number
is incorrect. Specify the
correct LDEV number.
51416610
0WCheck the values, and then
specify correct values.
Some of the entered values
are incorrect. Check the
values and then specify
correct values.
51446610
2ECall HP technical support.An error occurred in client
logic.
73016610
2ECall HP technical support.An error occurred in client
logic.
73026610
Remote Web Console Error Codes 331