HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6WWait a few seconds, and
then retry the operation.
The current Cache Residency
setting cannot be changed
because the prestaging
operation is in progress.
Please wait for a while, and
then retry the operation.
20450003
6EWait a few seconds, and
click [Refresh], and then
change the same
configuration again. Or
check the DKC status (if it is
not blocked). If the same
error occurs, call HP technical
support.
Prestaging not completed.20800003
6EIf this problem persists, call
HP technical support.
To perform a VLL operation
on an external volume, check
the status of the path to the
external volume.
An error occurred during a
VLL operation to add or
delete customized volumes.
Wait for a while, and then
retry the operation.
20810003
6EThe host is mounted or the
device is reserved. Unmount
the host and cancel
reservation of the device. If
the host is an AIX host,
unmount the host, and
execute the varyoffvg
command.
Processing is disabled
because the host is mounted
or the device is reserved.
20820003
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call HP technical
support.
20830003
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call HP technical
support.
20840003
6WWait a few seconds, and
then retry.
Copying is in progress for XP
Continuous Access, Business
Copy, ShadowImage for
Mainframe, Auto LUN,
Compatible FlashCopy(R) or
Flex Copy XP pairs. Please
wait for a while, and then
retry the operation.
20850003
6WReset the configuration
definition of XP Continuous
Access, XP Business Copy,
ShadowImage for
Mainframe, XP Auto LUN,
FlashCopy Mirroring, or XP
Snapshot, and then retry the
operation.
The configuration of XP
Continuous Access, Business
Copy, ShadowImage for
Mainframe, Auto LUN,
Compatible FlashCopy(R), or
XP Snapshot has been
defined. Reset the
configuration definition, and
then retry the operation.
20860003
Remote Web Console Error Codes 33