HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 56 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the amount of the
Preview data. If the amount
of the Preview data is too
large, clear the Preview data
by clicking [Apply], and retry
the operation.
If the amount of Preview data
is small or there is no Preview
data, too much data is
selected. Reduce the amount
of data, and retry the
operation.
The number of Preview data
may have exceeded the limit,
or too large number of data
is selected.
591156510
0WCheck the microcode version
of the DKCMAIN, and then
call HP technical support.
The specified function is not
supported by the current
microcode version.
591166510
0WCheck the microcode version
of the DKCMAIN, and then
call HP technical support.
The current microcode
version does not allow you to
change options for a journal
group in the Active status.
591196510
0WChange the status of the
mirror of the journal group to
Stop or Initial, and then retry
the operation.
The journal volume cannot be
deleted because the status of
the mirror of the journal
group is Active.
591536510
0WCheck the entered parameter.The entered parameter is
invalid.
The serial number, the
controller ID or the journal
group to be added is not
specified.
593236510
0WCheck the status of the
specified master journal
group.
A pair which is ready for
Delta resync cannot be
created under the current
status of the specified master
journal group. Check the
status of the specified master
journal group.
593256510
0WSpecify a mirror ID other than
0.
Specify a mirror ID other than
0 if you create a pair ready
for Delta resync.
593266510
0WCheck the status of the
specified master journal
group.
You cannot specify [Entire] or
[None] to the Initial copy
mode under the current status
of the specified master
journal group. Check the
status of the specified master
journal group.
593276510
0WChange the status of the
mirror of the journal group to
Initial, and then retry the
operation.
The journal volume cannot be
deleted, because the attribute
of the mirror for the journal
group is master and the status
of the mirror is Hold or
Holding.
593286510
328 Remote Web Console for Storage System Messages and Error Codes