HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 56 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WSpecify normal deletion, or
specify Group as the range.
You want to forcibly delete
pairs, but there are some
pairs where Group is not
specified as the range.
Specify Group as the range
when you want to forcibly
delete pairs.
552296510
0WTo delete pairs, click [Yes].
Otherwise, click [No].
[Warning]
There are some pairs where
Group is not specified as the
range in the pairs specified
to be deleted forcibly.
Other pairs in the same
group may suspend due to a
failure by this operation.
Are you sure you want to
delete pairs?
556446510
0WRegister a journal group.There is no journal group that
can be used as a master
journal group.
565046510
0iRegister secondary storage
systems, and then retry the
operation.
There are no secondary
subsystems available.
Register secondary
subsystems and then retry the
operation.
565056510
0iThere are no consistency
groups available. Create
unused consistency groups,
and then retry the operation.
There are no consistency
groups available. Create
unused consistency groups
and then retry the operation.
565226510
0iCheck the mirrors of the
specified volume.
No more mirrors can be
created for the specified
volume.
565236510
0iCheck the error information.An error occurred. Check the
error details.
590046510
0iSpecify the valid value.An invalid value is specified.590056510
0iCheck the number of journal
volumes in the specified
journal group, or check the
number of the selected
volumes.
No more journal volumes can
be registered, or too many
volumes are selected.
590066510
0iTo delete the specified
storage system, click [OK].
Otherwise, click [Cancel].
Are you sure you want to
delete the specified
subsystems?
590076510
0iTo delete the specified path,
click [OK]. Otherwise, click
[Cancel].
Are you sure you want to
delete the paths of the
specified subsystem?
590086510
0iClick [OK]. Apply the
Preview data to the disk
storage system, and then
retry the operation.
Since the number of Preview
data exceeded the maximum,
the excess data were
discarded. No more Preview
data can be stored.
590096510
Remote Web Console Error Codes 325