HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 56 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iClick [OK].The monitoring was stopped
by another operator. The
graph will be closed.
91156510
0iClick [OK].Another operator has
changed the Gathering
Interval value. The graph will
be closed.
91166510
0iTo close the graph, click
[OK]. Otherwise, click
[Cancel].
Are you sure you want to
close the graph?
91176510
0iTo apply this setting, click
[OK]. To change the setting,
click [Cancel].
Check the specified value.91186510
0iSelect a graph item.No graph item has been
selected. Select a graph item.
91196510
0iTo execute the processing
and close the graph, click
[OK], Otherwise, click
[Cancel].
The graph will be closed if
you execute the processing.
Do you want to execute the
processing?
91206510
0iTo execute this operation,
click [OK], Otherwise, click
[Cancel].
Data has been changed and
the graph has been
displayed. If you continue this
operation, all the data and
the graph will become
invalid. Are you sure you
want to continue this
operation?
91216510
0iTo export the pair status, click
[OK]. Otherwise, click
[Cancel].
Are you sure you want to
export pair status?
91226510
0iTo close the graphs, click
[OK]. Otherwise, click
[Cancel].
Are you sure you want to
close all active graphs?
91276510
0iClick [OK], and then specify
the correct volume.
The specified volume was not
found.
91286510
0iClick [OK].The history file has been
updated. Select the OK
button to display the history
logs from the beginning.
91556510
0WCheck the device emulation
or the definition of the SCSI
path.
There are no valid volumes.93036510
0WSet the port to Initiator before
registering the storage
system.
There are no initiator ports.93056510
5WObtain a license for XP
Continuous Access Journal,
and then install it.
The XP Continuous Access
Journal function is not
installed in this controller.
You cannot create pairs.
93066510
Remote Web Console Error Codes 323