HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 56 Error Codes — Part Code 6510
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WSpecify the data that you
want to register in the SVP
and retry the operation.
The displayed information
has not been changed.
50306510
0WCheck the contents, and retry.The Operation value is
invalid. Specify the correct
value.
51376510
0WCheck the contents, and retry.The value specified for
Gathering Interval is invalid.
Specify a valid value within
the range of 1 to 15.
51386510
0WSpecify the correct CU
number.
The specified CU number is
incorrect. Specify the correct
CU number.
51406510
0WSpecify the correct device
number.
The specified LDEV number
is incorrect. Specify the
correct LDEV number.
51416510
0WSpecify the correct group
number.
The specified GID is
incorrect. Specify the correct
GID.
51426510
0WSpecify the correct LUN.The specified LUN is
incorrect. Specify the correct
LUN.
51436510
0WCheck the values, and then
specify correct values.
Some of the entered values
are incorrect. Check the
values and then specify
correct values.
51446510
2ECall HP technical support.An error occurred in client
logic.
73016510
2ECall HP technical support.An error occurred in client
logic.
73026510
2ECall HP technical support.An error occurred in client
logic.
73036510
2EIf the error occurs after
retrying, call HP technical
support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
74406510
5WClick [Refresh], and retry.The system cannot apply the
new configuration. Do you
want to refresh?
81016510
5WCheck the port type, and then
change cable connections.
Exchange the channel cable
connections after
confirmation of the port type.
90066510
0iClick [OK].The export is complete.90096510
5WTo continue processing, click
[Yes]. If the processing
finishes, reconfigure the port
that is not in operation.
The Port Setting process has
not completed. Do you want
to continue for other ports?
90216510
Remote Web Console Error Codes 321