HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WConfirm the number of remote
command devices that has
been assigned to a mirror.
The operation failed, because
the number of assignable
remote command device to a
mirror exceeded the
maximum.
688636505
0WCheck if a remote command
device was assigned to the
specified mirror.
The operation failed, because
a remote command device
was not assigned to the
specified mirror.
688706505
0WRelease the quorum disk, or
select another volume.
The operation failed, because
the specified volume was a
quorum disk.
688856505
0WConfirm whether the remote
storage system supports the
specified operation.
The operation failed, because
the remote storage system did
not support the specified
operation.
688866505
0WConfirm the relationship
status of FlashCopy Mirroring
V2 and the pair status of
TrueCopy for Mainframe.
The operation failed, because
the specified primary data
volume was as follows:
• This volume was used as
T-VOL of FlashCopy
Mirroring V2.
• This volume was used as
M-VOL of TrueCopy for
Mainframe, and it was
suspended by either of the
following settings:
• It was a pair of
synchronous consistency
group.
• It was a pair that the
Cylinder was set to
Difference Management.
688876505
0WConfirm the relationship
status of the FlashCopy
Mirroring V2.
The operation failed, because
the specified “primary data
volume” was used as T-VOL
of FlashCopy Mirroring V2
that might be in the abnormal
state due to a failure.
688886505
5WVerify the restore journal
group specified for the
second mirror.
The operation of creating a
pair of the second mirror
failed because the specified
restore journal group was in
one of the following statuses:
• It is a master journal
group of the first mirror.
• It is a restore journal
group of the first mirror.
689046505
316 Remote Web Console for Storage System Messages and Error Codes