HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WSpecify a volume that is not
used by FICON(R) Data
Migration.
The specified volume cannot
be used as a journal volume
because it is used by
FICON(R) Data Migration.
688116505
0WCheck each capacity of the
primary data volume and the
secondary data volume after
the capacity change of
secondary data volume ends.
Plan a combination of
volumes for pair creating.
A pair could not be created
because the specified
secondary data volume was
an XP Thin Provisioning
volume whose capacity was
being changed.
688126505
0WCheck each capacity of the
primary data volume and the
secondary data volume after
the capacity change of
primary data volume ends.
Plan a combination of
volumes for pair creating.
A pair could not be created
because the specified
primary data volume was an
XP Thin Provisioning volume
whose capacity was being
changed.
688136505
0WThe specified volume runs on
the 2DC configuration in
which XP Continuous Access
or XP External Storage
Access Manager cooperates.
Release the pair of XP
Continuous Access or XP
External Storage Access
Manager, and then retry the
operation.
The pair cannot be released
because the specified volume
is used as the pair volume of
XP Continuous Access or XP
External Storage Access
Manager.
688156505
0WRetry the operation after the
completion of discarding
zero data on the specified
volume.
The operation failed, because
the specified secondary data
volume was a volume of XP
Thin Provisioning whose zero
data was being discarded.
688426505
0WRetry the operation after the
completion of discarding
zero data on the specified
volume.
The operation failed, because
the specified primary data
volume was a volume of XP
Thin Provisioning whose zero
data was being discarded.
688436505
0WWait until the initializing
process is completed, and
then retry the operation.
The operation failed, because
the specified primary data
volume was being initialized
by Business Copy or
ShadowImage for
Mainframe.
688486505
0WWait until the initializing
process is completed, and
then retry the operation.
The operation failed, because
the specified secondary data
volume was being initialized
by Business Copy or
ShadowImage for
Mainframe.
688496505
314 Remote Web Console for Storage System Messages and Error Codes