HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WThe specified master journal
group runs on the 2DC
configuration in which XP
Continuous Access or XP
External Storage Access
Manager cooperates.
Specify Group for the Error
Level.
The specified operation failed
because “LU” was specified
for the Error Level.
Please specify “Group” for
the Error Level, and retry the
operation
687816505
0WThe specified master journal
group runs on the 2DC
configuration in which XP
Continuous Access or XP
External Storage Access
Manager cooperates.
Specify something other than
0 for the Mirror ID, and then
retry the operation.
The Paircreate operation
failed because “0” was
specified for the Mirror ID.
Please specify other than 0
for the Mirror ID, and retry
the operation.
687826505
0WThe specified master journal
group runs on the 2DC
configuration in which XP
Continuous Access or XP
External Storage Access
Manager cooperates.
Delete the XP Continuous
Access or XP External
Storage Access Manager
pair, and retry the operation;
or specify a volume that is not
used by XP Continuous
Access or XP External
Storage Access Manager.
The Paircreate operation
failed because the specified
primary data volume was
used by XP Continuous
Access or XP External
Storage Access Manager.
687836505
0WThe master journal group of
the specified primary data
volume runs on the 2DC
configuration in which XP
Continuous Access or XP
External Storage Access
Manager cooperates.
Delete the XP Continuous
Access or XP External
Storage Access Manager
pair volume or suspend it.
The Pairresync operation
failed because the specified
primary data volume was one
of the following.
• The volume was not used
by XP Continuous Access
or XP External Storage
Access Manager.
• The volume was used by
XP Continuous Access or
XP External Storage
Access Manager, but the
pair status was not PSUS
or PSUE.
687846505
4iCheck the status of the
specified M-VOL from the
host or the SVP.
The M-VOL cannot be used
because M-VOL is a volume
of FICON(R) Data Migration.
688046505
4iCheck the status of the
specified R-VOL from the host
or the SVP.
The R-VOL cannot be used
because R-VOL is a volume
of FICON(R) Data Migration
or Data Migration.
688056505
Remote Web Console Error Codes 313