HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECorrect the settings, and then
retry the operation.
You cannot set the volumes
in the same parity group
across multiple CU groups.
19160003
6ECorrect the settings, and then
retry the operation.
The volume(s) in CLPR cannot
be set across multiple CU
groups.
19170003
6WCheck the blocked LDEV and
format the LDEV.
The newly added LDEV has
not been formatted. Check
the blocked LDEV and format
the LDEV.
19190003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20010003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20020003
3EAfter you reply to this
message, a window that
shows only [Refresh] will be
displayed. Wait a few
seconds, and then click
[Refresh].
If this problem persists,
inconsistency of configuration
may have occurred. Call HP
technical support. If the
problem occurred when
starting SVP, check the
version number of the
microcode and the
configuration information.
Auto LUN, QuickRestore, etc.
are in process. After you
reply to this message, a
window that shows only the
Refresh button will be
displayed. Wait for a while,
and then select [Refresh].
20030003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20040003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20050003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20060003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20090003
Remote Web Console Error Codes 31