HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EInstall the required program
product.
The specified function is not
available because it requires
Cache Residency for
Mainframe.
16040003
6iInstall the LUN Manager
program product and the
Open Volume Management
program product.
Program products are not
installed on the specified
volume.
16130003
6EWait for the maintenance to
complete, and then retry the
operation.
Maintenance operation is
being executed by the SVP.
Wait for the maintenance to
complete, and then retry the
operation.
19000003
6ESelect another volume.The specified volume cannot
be assigned as a LUSE
volume or a command
device, and the path of the
volume cannot be set
because it is being used as a
Pool volume.
19040003
6ESelect another volume.There are virtual volumes and
non-virtual volumes in the
volumes specified to compose
a LUSE volume.
19050003
6ESelect another volume.The specified volume cannot
be set as a command device
because it is being used as a
virtual volume.
19060003
6ESelect another volume.The specified volume contains
XP Snapshot pairs.
19100003
6ESelect another volume.The specified volume contains
Pool-VOLs.
19110003
6ECorrect the settings, and then
retry the operation.
The specified volume is a
remote command device, and
therefore the command
device setting or the
command device security
setting cannot be set or
released.
19120003
6ECheck the setting.The setting cannot be made
because the specified LDEV
is a remote command device.
19130003
6ECorrect the settings, and then
retry the operation.
The number of V-VOL(s) has
exceeded the maximum
number of V-VOL(s) that can
be set in a storage system.
19140003
6ECorrect the settings, and then
retry the operation.
The specified LDEV number
is invalid. The LDEV number
of the CU group which is not
set in CHA cannot be
specified.
19150003
30 Remote Web Console for Storage System Messages and Error Codes