HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WConfirm the licensed capacity
of the Data Retention Utility
of the secondary storage
system. To perform the
specified operation, purchase
a license key that allows you
to use a capacity larger than
the current capacity.
The operation failed because
the capacity of the secondary
subsystem has exceeded the
licensed capacity of Data
Retention Utility.
585026505
0WCheck the attribute and the
mirror status of the journal
group.
The specified operation failed
because of the attribute or the
mirror status of the journal
group.
585036505
5WIf this problem persists, call
HP technical support.
The operation failed. Refresh
the window and retry the
operation. If this problem
persists, call HP technical
support.
585046505
5WDisable the IO suppression
mode of the specified
primary data volume on the
XP External Storage window.
The Add Pair (Paircreate)
operation failed because the
IO suppression mode of the
specified primary data
volume was enabled.
585086505
0WCheck the mirror ID assigned
to the specified primary data
volume number
(LDKC:CU:LDEV) from the
secondary storage system,
and assign a mirror ID that is
not used, and retry the
operation.
The Add Pair (Paircreate)
operation failed.
The combination of the
specified primary data
volume number
(LDKC:CU:LDEV) and the
mirror ID is the same as the
combination specified from
another primary subsystem.
Check the mirror ID assigned
to the specified primary data
volume number
(LDKC:CU:LDEV) from the
secondary subsystem.
In the current microcode
version, specify a mirror ID
different from the ID used by
an existing pair, when you
create a pair by using the
same primary data volume
number (LDKC:CU:LDEV).
585106505
0WCheck the capacity of the
volume, and specify a volume
with larger capacity.
The capacity of the specified
volume is too small.
585306505
0WCheck the emulation types of
the specified volumes.
A journal volume cannot be
added because the
combination of the emulation
types for the journal volumes
is not correct.
585316505
Remote Web Console Error Codes 293