HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck whether the specified
secondary data volume is
used by the following
program products.
• XP Snapshot
• XP Business Copy
• XP Continuous Access
• XP Continuous Access
Asynchronous
• XP External Storage
Access Manager
• XP Auto LUN
The specified secondary data
volume is used by one of the
following program products.
• XP Snapshot
• Business Copy
• XP Continuous Access
• XP Continuous Access
Asynchronous
• XP External Storage
Access Manager
• Auto LUN
583556505
0WIf the problem persists despite
retrying, call HP technical
support.
The storage system is in
internal process. Retry the
operation.
584516505
5WFrom the FlashCopy
Mirroring window, check the
status of the specified primary
data volume.
The Add Pair operation or the
Resume Pair operation failed
because the specified
primary data volume was a
T-VOL of Compatible
FlashCopy(R).
584556505
5WVerify the status of the
specified primary data
volume from the Compatible
FlashCopy(R) window or the
mainframe host.
The Add Pair operation or the
Resume Pair operation failed
because the specified
primary data volume was a
volume of PreserveMirror
FlashCopy for Compatible
FlashCopy(R) V2.
584566505
0WSpecify a mirror ID other than
0, and then retry the
operation.
XP Continuous Access, XP
External Storage Access
Manager, or TrueCopy for
Mainframe is using the
specified primary data
volume. Specify a mirror ID
other than 0 if you use this
volume to create a pair.
584576505
5WSpecify the same mirror ID as
the registered mirror ID, and
then retry the operation.
A different mirror ID has
already been registered in
the specified master journal
group. Only one mirror ID
can be registered in one
journal group, so specify the
same mirror ID.
584586505
5WFrom the FlashCopy
Mirroring V2 window, check
the status of the specified
secondary data volume.
The Add Pair operation or the
Resume Pair operation failed
because the specified
secondary data volume was
used by FlashCopy Mirroring
V2.
584596505
Remote Web Console Error Codes 291