HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the setting of the
volume in the Data Retention
Utility window or the Volume
Retention Manager window.
The specified volume cannot
be used as a journal volume
because of a Data Retention
Utility setting or a Volume
Retention Manager setting.
583426505
0WCheck the setting of the
specified volume in the
Volume Security window.
The specified volume cannot
be used as a journal volume
because of a Volume Security
setting.
583436505
0WCheck the specified
secondary data volume and
specify a non-LUSE volume.
The Add Pair (Paircreate)
operation failed because the
specified secondary data
volume is a LUSE volume.
583446505
0WBe sure that IO suppression
mode of the specified
secondary data volume is
enabled on the XP External
Storage window. If the IO
suppression mode is
disabled, check the
microcode version of
DKCMAIN of the secondary
storage system, and call HP
technical support.
The Add Pair (Paircreate)
operation failed due to one
of the following reasons:
• The IO suppression mode
of the specified secondary
data volume is enabled.
• The microcode version of
the secondary subsystem
does not support external
volumes.
583456505
0WFrom the Data Retention
Utility window, check the
settings of the specified
secondary data volume.
The Paircreate operation
failed because a Data
Retention Utility VMA was set
up on the specified
secondary data volume.
583466505
0WCheck the setting of the
specified secondary data
volume in the Volume Security
window.
The Add Pair (Paircreate)
operation failed because of
a Volume Security setting on
the specified secondary data
volume.
583476505
0WFrom the Data Retention
Utility window, check the
settings of the specified
primary data volume.
The Paircreate operation
failed because a Data
Retention Utility VMA was set
up on the specified primary
data volume.
583486505
0WFrom the Volume Retention
Manager window, check the
settings of the specified
primary data volume.
The Add Pair operation failed
because the specified
primary data volume had a
Protect attribute set by
Volume Retention Manager.
583496505
0WCheck the status of the
primary data volume in the
XP Business Copy window or
the ShadowImage for
Mainframe window.
The Add Pair (Paircreate)
operation failed because the
specified primary data
volume was one of the
following:
• a Business Copy S-VOL
• a ShadowImage for
Mainframe T-VOL
• a reserved volume
583526505
Remote Web Console Error Codes 289