HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4ECheck whether the primary
storage system supports
remote copy via serial
interface. Install the
microcode that supports
remote copy via serial
interface, or execute remote
copy via fibre interface.
The primary subsystem does
not support remote copy via
serial interface.
89226505
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89246505
4WCheck the port type of the
specified port, and retry the
operation.
Invalid port type.89296505
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89306505
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89316505
0WCheck whether the specified
LDKC number is defined in
the configuration of the
primary storage system.
Failed to create the logical
path, because the
configuration definition of the
specified LDKC number did
not exist in the primary
storage system.
89326505
0WCheck the configuration of
the specified secondary data
volume.
The Add Pair (Paircreate)
operation failed because the
specified secondary data
volume was a NAS system
volume.
89346505
0WCheck the microcode version
of the secondary storage
system.
The Paircreate (Add Pair)
operation failed. The
microprogram version of the
specified secondary
subsystem does not support
XP Continuous Access with
NAS volumes.
89366505
4iCheck the access attribute of
the specified secondary data
volume.
The specified secondary data
volume is unusable because
of the access attribute
changed by Data Retention
Utility.
89446505
4iCancel the definition of the
external volume, and retry the
operation.
The external volume that is
mapped to an internal
volume is connected to the
port.
89476505
4iStop I/O operations, and
retry.
The specified port is receiving
I/O requests.
89486505
4ECheck the SSB log, and then
call HP technical support.
An internal error occurred.89496505
4ECheck the SSB log, and then
call HP technical support.
An internal error occurred.89506505
Remote Web Console Error Codes 275