HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iDelete the DKC once, and
then add the DKC using the
same logical address.
The existing logical addresses
are not the same.
87316505
4iXP Continuous Access Journal
or Universal Replicator for
Mainframe must be installed
in the storage system when
you create a path or a pair
for XP Continuous Access
Journal or Universal
Replicator for Mainframe.
Install XP Continuous Access
Journal or Universal
Replicator for Mainframe in
the storage system.
XP Continuous Access Journal
or Universal Replicator for
Mainframe is not installed in
the subsystem.
87336505
4iXP Continuous Access Journal
or Universal Replicator for
Mainframe must be installed
in the remote storage system
when you create a path or a
pair for XP Continuous
Access Journal or Universal
Replicator for Mainframe.
Install XP Continuous Access
Journal or Universal
Replicator for Mainframe in
the remote storage system.
XP Continuous Access Journal
or Universal Replicator for
Mainframe is not installed in
the remote subsystem.
87346505
4ECheck the serial number and
the controller ID of this remote
storage system and already
registered remote storage
systems, and then specify the
correct values.
If the specified values are
correct, check the cable
connection of the remote
storage system. If the problem
persists, call HP technical
support.
The serial number or the
controller ID of the remote
subsystem is incorrect.
87356505
0WDelete data volume pairs of
the specified remote storage
system. Then delete journal
groups, if any. Ensure that
there are no data volume
pairs and journal groups,
and then retry the operation.
The specified remote
subsystem contains journal
groups or data volume pairs
for remote copy operations.
87366505
4ECheck the SSB log, and then
call HP technical support.
An internal error occurred.87376505
4WCheck the status of the
pinned tracks in the primary
data volume, and clear the
pinned tracks.
Pinned track(s) exists in the
primary data volume.
87426505
4WCheck the status of the
pinned tracks in the
secondary data volume, and
clear the pinned tracks.
Pinned track(s) exists in the
secondary data volume.
87436505
Remote Web Console Error Codes 269