HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf the error occurs after
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
71116505
5EIf the error occurs after
retrying, call HP technical
support.
This error code is not
registered.
73106505
3ERetry the operation. If this
problem persists, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
80006505
3EWait a few seconds, and
then retry the operation.
A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
80016505
3EWait a few seconds, and
then retry the operation.
A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
80026505
2ERetry the operation. If this
problem persists, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
81006505
3ECheck whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
This function is not supported.81026505
4iRetry the operation.Retry operation.87006505
4iCheck the path status and
edit the path again.
The logical path between the
local and the remote
subsystems is invalid.
87016505
4iRefresh and check the
window. If possible, retry the
operation on the primary
data volume.
The status of the primary data
volume is not valid.
87026505
4iCheck the number of paths.The specified number of
paths is less than the
minimum number of paths in
the DKC Option window.
87036505
4WCheck the path status in the
DKC Status window, and
then restore the paths.
The specified number of
paths is less than the
minimum number of paths in
the DKC Option window, due
to a communication error
between the local and the
remote subsystems.
87046505
4WCheck the CHA status on the
window. If the CHA is
blocked, replace the CHA,
and then retry the operation.
The path could not be deleted
due to a communication error
between the local and the
remote subsystems.
87056505
266 Remote Web Console for Storage System Messages and Error Codes