HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 52 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WAssign another external
volume not used in the
quorum disk IDs, and then
retry the operation.
An external volume is
assigned to two or more
quorum disk IDs. An external
volume cannot be used for
multiple quorum disk IDs.
657726010
0WSelect an RCU and a quorum
disk ID that have the same
serial number and the
controller ID, and then retry
the operation.
The serial number and the
controller ID of the RCU
registered in a quorum disk
do not correspond with the
specified RCU.
657736010
0WSelect the quorum disk ID
corresponding with the serial
number and the controller ID
of the RCU that is used by the
specified pair, and then retry
the operation.
The serial number and the
controller ID of the RCU
registered in a quorum disk
do not correspond with the
information of RCU used by
the specified pair.
657746010
5WSpecify the quorum disk ID,
and retry the operation.
The quorum disk ID was not
specified. When the "Change
attribute to ESAM" parameter
has been changed from "No"
to "Yes", specify the quorum
disk ID.
658046010
0WSelect a volume other than an
XP Thin Provisioning volume
and retry the operation.
An XP Thin Provisioning
volume is contained in the
selected volumes. This volume
cannot be used for XP
Continuous Access
Asynchronous or TrueCopy
Asynchronous for Mainframe.
687536010
0WCheck the LDKC number for
the specified data volume,
and specify only one LDKC
number.
There are two or more LDKC
numbers for the specified
data volume. In this
operation, specify only one
LDKC number.
690186010
0WRegister RCUs in the CU or
RCUs of CU Free, and then
retry the operation.
There are no RCUs available.
Register RCUs in the CU or
RCUs of CU Free, and then
retry the operation.
690226010
0WTo create pairs that have
different CU numbers
coexisting in the pair, register
RCU of CU Free and retry the
operation.
To crate pairs with RCU in the
CU, select the M-VOLs so that
different CU numbers do not
coexist in the M-VOLs, and
retry the operation.
There are no RCUs available.
To create pairs that have
different CU numbers
coexisting in the pair, register
RCU of CU Free and retry the
operation.
To create pairs with RCU in
the CU, select the M-VOLs so
that different CU numbers do
not coexist in the M-VOLs,
and retry the operation.
690236010
0WClick [OK]. Apply the
Preview data to the disk
storage system, and then
retry the operation.
Since the number of preview
data exceeded the maximum,
the excess data were
discarded. No more preview
data can be stored.
690336010
Remote Web Console Error Codes 263