HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 52 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the specified values
and retry the operation.
The specified value exceeds
the range. Alternatively, the
relationship between the
specified values is not
appropriate.
93606010
5WSelect Add RCU command,
and then register a DKC
path.
If you plan to create a pair
with the specified LUSE
volumes, a DKC path is
required.
550356010
0WFind the CUs that can be
used by the storage system
specified by the Controller ID.
The subsystem specified by
Controller ID is not available
for the particular CU selected
from the tree.
552026010
0WFind the ports that can be
used by the storage system
specified by the Controller ID,
and set them as initiator
ports.
There are no initiator ports
that can be used by the
subsystem specified by
Controller ID.
552036010
0WCheck the settings of the
specified RCU, M-VOL and
R-VOL.
The M-VOL or R-VOL is not
supported by the specified
RCU.
552046010
0WRegister the consistency
groups, and then retry the
operation.
There are no consistency
groups available for the CLPR
of the specified volumes.
Register the consistency
groups and then retry the
operation.
565376010
0WCheck the size of the file,
decrease the size and retry
the operation.
The size of the specified file
exceeds 8 megabytes, so the
file cannot be uploaded.
565406010
0WTo cancel the change
operation of the option
parameter, click [OK].
Otherwise, click [Cancel].
Are you sure you want to
cancel the change operation
of the option parameter that
you specified?
590016010
0iTo output the file, click [Yes].
Otherwise, click [No].
Are you sure you want to
output the %s file?
590116010
0iClick [OK].The %s file does not exist.590126010
0WTo overwrite the file, click
[Yes]. Otherwise, click [No].
The specified file already
exists. Do you want to
overwrite this file?
590136010
0WCheck the CT group or the
range of the specified pairs.
If necessary, select the pairs
again.
You cannot specify two or
more pairs in the same CT
group, if Group is selected
as the Range of these pairs.
Only one pair is displayed in
the Preview list.
590256010
0WCheck the RCU parameter
settings.
The specified RCU has been
already set. Check the RCU
parameter settings.
590266010
Remote Web Console Error Codes 261