HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 52 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WBecause there were
overlapped paths in the
added paths, the overlapped
paths were eliminated. Click
[OK] and continue.
You set the same path more
than once. The duplicate
paths are excluded.
93086010
0WBecause all the added paths
overlapped, the operation of
adding paths cannot be
executed. Click [OK] and
continue.
All paths which you set have
already been registered. This
operation will terminate
because there is no path
which can be added.
93096010
0WBecause there were
overlapped SSIDs in the
added SSIDs, the overlapped
SSIDs were eliminated. Click
[OK], and continue.
You set the same SSID more
than once. Duplicate SSIDs
are excluded.
93106010
0WBecause all the added SSIDs
are overlapped, the
operation of adding SSIDs
cannot be executed. Click
[OK], and continue.
All SSIDs which you set have
already been registered. This
operation will terminate
because there is no SSID
which can be added.
93116010
0WFollow the instructions in the
message.
Through this operation,
M-VOL status will be changed
to Simplex mode even if the
M-VOL is online to the host.
93166010
0WFollow the instructions in the
message.
The destination volume of the
specified volume pair may
contain some inconsistency
because volume copy is not
completed yet. Full volume
initialization is required
before re-using it.
93176010
0WTo delete the pair, even
though you cannot re-execute
the R-VOL deletion, click
[OK]. If not, click [Cancel].
As a result of this operation,
you will not be able to re-start
ERASE R-VOL operation.
93186010
0WTry again after the script
ends.
The specified operation is
prohibited while the script is
running.
93246010
0iClick [OK].The script is terminated
forcibly.
93256010
0iClick [Refresh] to update the
history file. If this problem
persists, call HP technical
support.
The monitoring time is over,
but the history file is not fully
updated yet.
93276010
0iClick [OK], and then continue
the operation.
This operation is not applied
yet.
93326010
0iThe requested operation has
started. Click [OK] to close
the dialog.
The requested operation has
started.
93376010
260 Remote Web Console for Storage System Messages and Error Codes