HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 52 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iClick [OK] to continue
processing.
Recovered from the error that
occurred when copying
started.
91296010
0WFollow the instructions in the
message.
As a result of this operation,
you will not be able to re-start
ERASE R-VOL operation. To
delete the pair forcibly, try
again with Force option.
91546010
0iClick [OK].The history file has been
updated. Select the OK
button to display the history
logs from the beginning.
91556010
0WFollow the instructions in the
message.
WARNING: Destination
volume of specified volume
pair may contain some
inconsistency, because
volume copy is not completed
yet. Full volume initialization
is required before re-using it.
93006010
0WFollow the instructions in the
message.
WARNING: Through this
operation, M-VOL status will
be changed to SMPL status
forcibly, but R-VOL status will
not be changed. If you do
this operation, change the
R-VOL status to SMPL later.
93016010
0WSet the port to RCP before
registering RCU. Moreover,
set up the correct range of
CU numbers to which the RCP
port is applied.
There are no RCP ports.93026010
0WConfirm whether the
command device for Business
Continuity Manager is
defined.
There are no valid volumes.93036010
0WFollow the instructions in the
message.
WARNING: Group or C/T
is specified for Delete Range.
Confirm all pairs in the group
are synchronized. If some
volumes are not
synchronized, full volume
initialization is required
before re-using them.
93046010
0WSet the port to Initiator before
registering RCU.
There are no initiator ports.93056010
0WThere is no XP Continuous
Access license. Set the
license.
The XP Continuous Access
function is not installed in this
controller. You cannot create
pairs.
93066010
0WBecause the same volume
where multiple paths are
defined was selected, the
overlapped one was
eliminated. Click [OK] and
continue.
You specified the same
volumes more than once. The
duplicate occurrences were
excluded.
93076010
Remote Web Console Error Codes 259