HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iCheck the version of the
microcode of the storage
system.
If the microcode of the
storage system supports the
interface between FlashCopy
Mirroring V2 and M-VOL of
TrueCopy for Mainframe,
and then check the setting of
Difference Management of
the specified volume. Also,
check the setting of Initial
Copy when you have
executed Add Pair operation.
If microcode version or the
setting does not match the
above description, check
whether the specified volume
belongs to Sync Group from
Business Continuity Manager.
The specified M-VOL is a
volume used by FlashCopy
Mirroring V2.
The operation failed because
of one of the following
reasons.
• The current microcode
cannot use a volume used
by FlashCopy Mirroring
V2 as an M-VOL.
• Cylinder was set for the
Difference Management
of the M-VOL.
• The Add Pair operation
was executed specifying
None for Initial Copy.
• The M-VOL belonged to
Sync Group.
89896005
4iSpecify the volume that can
be used to create a pair, and
then retry the operation.
A pair cannot be created,
because the specified R-VOL
is used for Compatible
FlashCopy V2.
89906005
5ESpecify the port assigned to
SLPR0.
The attribute of the port
assigned to SLPRs except
SLPR0 can only be changed
to Target.
552306005
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565246005
3ECall HP technical support.An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
570056005
5iSelect another volume, and
retry the operation.
A pair cannot be created
because the specified M-VOL
is used by XP Continuous
Access Journal or Universal
Replicator for Mainframe.
583196005
Remote Web Console Error Codes 243