HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iCheck the status of the
specified R-VOL.
The operation failed because
the specified R-VOL was used
for Flex Copy XP.
89736005
4iCheck the status of the
specified R-VOL.
Failed to create a pair,
because the specified R-VOL
is path-defined from the iSCSI
port.
89756005
4iCheck the status of the
specified M-VOL.
A pair cannot be created,
because the specified M-VOL
is an external volume.
89766005
4iCheck the status of the
specified R-VOL.
A pair cannot be created,
because the specified R-VOL
is an external volume.
89776005
4iConfirm the licensed capacity
Volume Retention Manager
on the RCU side. To execute
this operation, purchase a
license key that allows you to
use a larger capacity.
The operation failed because
the licensed capacity of
Volume Retention Manager
on the RCU side was
exceeded.
89806005
4iSpecify the volume that can
be used to create a pair, and
then retry the operation.
You cannot create a pair,
because the specified M-VOL
is a command device.
89826005
4iSpecify the volume that can
be used to create a pair, and
then retry the operation.
You cannot create a pair,
because the specified R-VOL
is a command device.
89836005
4ECheck the settings, and then
retry the operation.
You cannot create a new
pair, because the number of
CT groups of asynchronous
pairs that you can register in
SLPR exceeds the limit.
89846005
4iCheck the settings, and then
retry the operation.
The coexistence of volumes
that are in the different CLPRs
is not allowed within one CT
group.
89856005
4iVerify that both MCU and
RCU support the serial
interface.
Cannot create a pair,
because the serial interface
is not supported by either the
MCU or the RCU.
89866005
4iVerify that both MCU and
RCU support LUSE volumes
that consist of volumes from
different CUs.
Cannot create a pair,
because LUSE volumes
consisting of volumes from
different CUs are not
supported by either the MCU
or the RCU.
89876005
4iVerify that both MCU and
RCU support LUSE volumes
consisting of volumes that
differ in capacity.
Cannot create a pair,
because LUSE volumes
consisting of volumes that
differ in capacity are not
supported by either the MCU
or the RCU.
89886005
242 Remote Web Console for Storage System Messages and Error Codes