HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iDelete all the pairs with the
Fibre Channel remote copy
connection in the specified
MCU, and then retry the
operation.
The Paircreate operation with
the serial remote copy
connection failed because
there are pairs with the Fibre
Channel remote copy
connection in the specified
MCU.
89386005
4iCheck the LUN of the
specified M-VOL by using
RAID Manager, and specify
the LUN with the value less
than 1,024 for the M-VOL.
The specified M-VOL cannot
be used.
89396005
4iConfirm the status of the
specified R-VOL.
The operation failed because
the specified R-VOL is in a
Read Only status by Volume
Retention Manager.
89406005
4iRefresh the window a few
minutes, later and check the
status of the specified volume
and other volumes of the
same group in the RCU. If it
is possible to perform
operations on the volumes,
retry the operation.
The specified volume or other
volume(s) of the same group
in the RCU is being changed
to Simplex/Suspend status.
Retry the operation a few
minutes later.
89436005
4iCheck the status of the
specified R-VOL.
The specified R-VOL is not
available according to the
attribute of the R-VOL
changed by Data Retention
Utility.
89446005
4WVerify whether the
parameters of M-VOL, for
example, CU number, port,
GID and LUN, are supported
with the RCU microcode
program version or not.
If you create a pair by using
a LUSE volume, verify
whether or not two or more
CU numbers coexist in P-VOL
and S-VOL.
Specify RCUs of CU Free
when two or more CU
numbers coexist in P-VOL or
S-VOL.
Then, retry the operation with
the correct parameters.
At least one of the following
is invalid:
• M-VOL parameters (CU
number, Port, GID, LUN)
• SSID or CU number of the
RCU
• R-VOL parameters (Port,
GID, LUN)
89456005
4iRelease the setting of the
external volume, and retry the
operation.
The external volume that is
mapped to an internal
volume is connected to the
port.
89476005
4iStop I/O operations, and
retry.
The specified port is receiving
I/O requests.
89486005
4ECall HP technical support.An internal error occurred.89496005
4ECall HP technical support.An internal error occurred.89506005
Remote Web Console Error Codes 241