HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4EConfirm whether the MCU
supports serial remote copy
connections. Install the
microcode of version that
supports serial remote copy
connections, or use fibre
remote copy connections.
The specified MCU does not
support serial remote copy
connections.
89226005
4EConfirm whether the RCU
supports serial remote copy
connections. Install the
microcode of version that
supports serial remote copy
connections, or use fibre
remote copy connections.
The specified RCU does not
support serial remote copy
connections.
89236005
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths exist on the
RCU port.
89246005
4EConfirm the status of Volume
Security of the specified
R-VOL.
The specified R-VOL is
prohibited to use by Volume
Security.
89266005
4EConfirm the status of Volume
Security of the specified
M-VOL.
The specified M-VOL is
prohibited to use by Volume
Security.
89276005
4WCheck the port status and
retry.
Invalid port type.89296005
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths exist on the
RCU port.
89306005
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths exist on the
RCU port.
89316005
5WCheck whether the specified
LDKC number or CU number
is defined as configuration
information for the MCU.
Since the configuration
definition of the specified
LDKC number or CU number
does not exist, the logical
paths between MCU and
RCU cannot be established.
89326005
4iCheck the configuration of
the specified R-VOL.
The Paircreate operation
failed because specified
R-VOL is the NAS system
volume.
89346005
4iCheck the microcode version
of the RCU.
The Paircreate operation
failed. The version of the
specified RCU does not
support XP Continuous Access
with the NAS volume.
89366005
4iDelete all the pairs with the
serial remote copy connection
in the specified MCU, and
then retry the operation.
The Paircreate operation with
the Fibre Channel remote
copy connection failed
because there are pairs with
the serial remote copy
connection in the specified
MCU.
89376005
240 Remote Web Console for Storage System Messages and Error Codes