HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
11040003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, please call HP
technical support.
11050003
2EIf this problem persists, call
HP technical support.
An error occurred. If this
problem persists, please call
HP technical support.
11100003
2EA nickname is not specified
when the configuration
change of LUN Manager is
requested. The error does not
occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
An error occurred. If this
problem persists, call HP
technical support.
11110003
6EChange the volumes to create
CV by VLL operation, retry
the VLL setting.
The specified volume is
currently used by Parallel
Access Volume and is not
available for VLL operation.
11130003
2EYou have not specified the
value when registering
WWN. Or zero is set as the
WWN value. The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
An error occurred. If this
problem persists, call HP
technical support.
11160003
6EThe configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
Command device security
cannot be set to the specified
volume because the volume
is not a command device.
11230003
24 Remote Web Console for Storage System Messages and Error Codes