HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iConfirm the PCB type and try
the operation again with a
correct parameter.
There are no PCBs which
corresponds to the specified
port type.
88766005
4ECall HP technical support.An internal error occurred.88776005
4EVerify that the CT group is
active in the MCU.
CT Group is not active.88786005
4iVerify that there are no active
asynchronous pairs in this
group, and retry the
operation.
At least one asynchronous
pair is active in this group.
88796005
4iRetry the operation after the
pair status has been changed
to simplex.
Wait. Retry Delete Group
operation in a few minutes.
88806005
4ECall HP technical support.An internal error occurred.88816005
4iDelete all of the XP
Continuous Access CT
groups, and then retry the
operation.
Asynchronous Option
(Current Pending Update
Data Rate) cannot be
changed, because the CT
group is active.
88826005
4ECall HP technical support.An internal error occurred.88836005
4ECall HP technical support.An internal error occurred.88846005
4ECall HP technical support.An internal error occurred.88856005
4ECall HP technical support.An internal error occurred.88866005
4ECall HP technical support.An internal error occurred.88876005
4ECall HP technical support.An internal error occurred.88886005
4ERefresh the window, and
retry. If nothing changes, call
HP technical support.
The specified port is not
equipped.
88896005
4EWait until the initialization of
the port ends, and retry the
operation.
The specified port is being
initialized.
88906005
4EDelete the logical paths on
the specified port and retry
the operation.
Logical paths exist on the
MCU port.
88916005
4WTo continue this operation,
click [Yes]. If not, click [No].
R-VOLs exist on the RCU port.
Are you sure you want to
continue this operation?
88926005
4ECall HP technical support.An internal error occurred.88936005
4EStop the jobs from the host
and retry the operation.
Pending background data
exists on the MCU.
88946005
4EStop the jobs from the host
and retry the operation.
Pending background data
exists on the RCU.
88956005
4ERefresh the window, and
retry. If nothing changes, call
HP technical support.
A parameter error occurred.88966005
Remote Web Console Error Codes 237