HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iThe pair status does not allow
this operation. Refresh and
confirm the pair status
information on the window
first. If the R-VOL status is
valid, retry the operation.
Delete Pair (Pairsplit-S)
operation with C/T option
failed because some R-VOLs
in the group are in Duplex
(PAIR) or Pending (COPY)
status.
88596005
4ECall HP technical support.An internal error occurred.88606005
4ECall HP technical support.An internal error occurred.88616005
4iThe delete pair (Pairsplit-S)
operation failed. A few
minutes later, refresh the
window, confirm if the
specified volumes are in the
permissible status, and then
retry the operation.
Wait a few minutes and retry
the Delete Pair (Pairsplit-S)
operation.
88626005
4EThe Remote Console
computer detected an
unknown error code. Call HP
technical support.
Unknown Error Code.88636005
4ECall HP technical support.An internal error occurred.88646005
4ECall HP technical support.An internal error occurred.88656005
4ECall HP technical support.An internal error occurred.88666005
4ECall HP technical support.An internal error occurred.88676005
4EThe operation failed because
a duplicate CT Group is
already active in the MCU.
Verify the status of the CT
group and retry the
operation.
Duplicate CT Group# (A CT
Group has been already
active in MCU).
88686005
4EVerify that the CT group is
active in the MCU.
CT Group is not active.88696005
4iThe group operation failed
because the specified group
has at least one
asynchronous pair. Refresh
and check the XP Continuous
Access window.
CT Group Option cannot be
changed unless all
asynchronous pairs in the
group are suspended or
deleted.
88706005
4iInstall TrueCopy
Asynchronous for Mainframe
in the MCU and retry the
operation.
The TrueCopy Asynchronous
for Mainframe function is not
installed in the specified
MCU.
88716005
4iInstall the XP Continuous
Access Asynchronous
function in the MCU, and
then retry the operation.
XP Continuous Access
Asynchronous function is not
installed in the specified
MCU.
88736005
4iSpecify Local or None for the
timer type on the XP
Continuous Access window,
and then retry the operation.
Invalid Timer Type option.88746005
4ERefresh and check the XP
Continuous Access window.
At least one asynchronous
pair is active in this group.
88756005
236 Remote Web Console for Storage System Messages and Error Codes