HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4WThe XP Continuous Access
operation failed, because
R-VOL has one of the
following conditions:
1. The volume is blocked.
2. The volume is under
maintenance.
3. The volume is copying
data (correction copy or
drive copy)
4. The volume is in the
correction access
condition.
The specified R-VOL is not a
permissible condition of XP
Continuous Access.
88206005
4WVerify the configuration of the
specified R-VOL.
The specified R-VOL is not
recognizable from the
connection port.
88216005
4ECheck whether the volume is
in a usable condition. If the
volume is usable, call HP
technical support.
An I/O Error occurred on the
R-VOL, or the R-VOL is in an
unusable condition.
88226005
4iRefresh and confirm the XP
Continuous Access window
in the MCU and RCU.
The Add Pair
(Paircreate)/Resume Pair
(Pairresync) operation failed
combining pairs (using Fibre
path and Serial path) is not
allowed in the same CT
Group.
88256005
4ECall HP technical support.An internal error occurred.88266005
4iRetry the operation in a few
minutes.
If this problem persists, select
the volumes where the error
occurred, execute the Delete
Pair (Pairsplit-S) command
with the Force option, and
then retry the operation.
Wait a few minutes and retry
the Add Pair
(Paircreate)/Resume Pair
(Pairresync).
88276005
4ETake the following actions:
1. Specify only one CU# for
the same LCP of the RCU.
2. Connect to the LCP that
can access the specified
R-VOL.
The LCP of the RCU cannot
access the specified R-VOL.
88296005
4iCheck the status of the
specified M-VOL (P-VOL) from
HOST or SVP.
The specified M-VOL is
already used as a reserved
volume of Auto LUN.
88306005
4iCheck the status of the
specified R-VOL (S-VOL) from
HOST or SVP.
The specified R-VOL is
already used as a reserved
volume of Auto LUN.
88316005
232 Remote Web Console for Storage System Messages and Error Codes