HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iSelect another volume.A volume cannot be used as
an M-VOL when:
• it is used by XP
Continuous Access Journal
or Universal Replicator for
Mainframe.
• it is used by
ShadowImage for
Mainframe or Compatible
FlashCopy(R).
87766005
4iCheck the controller type of
the specified MCU and RCU,
and then call HP technical
support.
Combination of MCU with
RCU controller type is not
supported.
87776005
4EThere is an invalid cache or
shared memory status on the
RCU. Check the status and
recover the cache or shared
memory, and then retry the
operation.
One side of the Cache or
shared memory on the RCU
is blocked.
87786005
0WConfirm the controller type of
the RCU.
XP Continuous Access or XP
External Storage Access
Manager is not supported
under the RCU controller
type.
87796005
4iInstall TrueCopy for
Mainframe in the MCU and
RCU.
TrueCopy for Mainframe
function is not installed in the
specified controller.
87806005
4iInstall TrueCopy for
Mainframe in the MCU and
RCU.
TrueCopy for Mainframe
function is not installed in the
specified controller.
87816005
4iRecheck the volume.The M-VOL is defined as the
expansion volume.
87856005
4iRecheck the volume.The R-VOL is defined as the
expansion volume.
87866005
4iCheck the Port, GID and LUN
settings of the RCU. Or, by
referring to the OPEN
Platform section in the
maintenance manual, check
whether the device emulation
type of the R-VOL is
supported or not.
The specified expanded
volume in the RCU is not
defined. Or, the device
emulation type of the R-VOL
is not the type that can be
used for remote copy
operations performed via the
serial interface.
87886005
4iThe combination of the
specified volumes for LUN
Expansion is not valid. Verify
the parameters and retry the
operation.
Combination of the specified
expansion volumes is not
valid.
87896005
4iConfirm the status of the
specified expansion volume
and microcode version of the
RCU.
The specified expansion
volume (Port/GID/LUN) of
the RCU is not usable.
87906005
Remote Web Console Error Codes 227