HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iSelect another volume.A volume cannot be used as
an R-VOL when:
• it is used by Compatible
XRC.
• it is used by PPRC or XP
Continuous Access.
• it is used by Concurrent
Copy.
• it is in a reserved
condition.
• it is used by XP
Continuous Access Journal
or Universal Replicator for
Mainframe.
• it is used by
ShadowImage for
Mainframe or Compatible
FlashCopy(R).
87456005
4iSee the Installation and Open
Platform sections in the
maintenance manual to
confirm whether the device
emulation type of the M-VOL
is supported by XP
Continuous Access (via serial
interface).
The device emulation type of
the M-VOL is not supported.
87466005
4iThe version of the microcode
on the storage system does
not support the specified
function or operation. Call HP
technical support.
Current microprogram
version does not support the
specified operation.
87476005
4iData migration cannot start
because the volume is online.
Vary the path offline, and
retry.
Specified M-VOL may be in
use by HOST.
87486005
4iCheck if the input number of
R-VOL is correct. If not, enter
the correct R-VOL number. If
the number is correct, vary
the specified path offline.
Specified R-VOL is still online
from HOST.
87496005
4iAdd Pair operation failed.
1. Confirm the controller
emulation type, and see
the manual.
2. Confirm the CT Group
number in the MCU.
XP Continuous Access is not
supported under the RCU
Controller emulation type, or
the CT Group is not usable.
87516005
4ECall HP technical support.An internal error occurred.87536005
4ECheck the serial number or
SSID of MCU, and then retry
with correct parameter.
Invalid MCU serial number
or MCU SSID.
87546005
224 Remote Web Console for Storage System Messages and Error Codes