HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECheck and correct the
settings. If Volume Initialize
and Make Volume are
specified at the same time,
operate them separately.
The CU number and the LDEV
number set in the VLL
operation are the same as
those of other volumes.
10410003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10420003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10430003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10440003
6ECorrect the specified content,
and issue the request again.
The specified Subsystem ID
already exists. Specify
another SSID.
10450003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10460003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10480003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, please call HP
technical support.
10490003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, please call HP
technical support.
10510003
2EYou are trying to perform
LUN Manager operation for
non-Fibre port. The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
An error occurred. If this
problem persists, call HP
technical support.
10590003
6EFirst, add paths, and then
click Apply. Next, turn off the
security switch, and then click
Apply.
Security Switch Off operation
and path adding operation
cannot be performed
simultaneously. Check the
current configuration and
then make settings again.
10610003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10620003
22 Remote Web Console for Storage System Messages and Error Codes