HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 49 Error Codes — Part Code 5310 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WDelete the WWN from
Performance Control Group
first.
A WWN registered on an
Performance Control group
cannot be deleted.
51335310
5WSet the attribute together.The attribute of the WWN is
different from that of the
Performance Control group.
51345310
5WCheck the content, and retry.This WWN is already
registered as a different
Nickname.
51365310
5iDelete the WWN from the
Performance Control group.
Delete the WWN from the
Performance Control group
first.
65185310
5iClick [Yes] to change the
WWN for other ports.
Do you want to change the
WWN for other ports, too?
65195310
2ERetry the same operation
several times. If the same
error occurs, call HP technical
support.
Configuration information is
not correct. Call HP technical
support.
74275310
5iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Are you sure you want to
delete the WWN?
90775310
5iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Are you sure you want to
delete the Performance
Control group?
90785310
5iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The Performance Control
group is deleted because no
WWN is registered on the
Performance Control group.
90795310
5WThe control status will change
to Port Control. Click [OK].
The control status will change
to Port Control.
93125310
5WThe control status will change
to WWN Control. Click
[OK].
The control status will change
to WWN Control.
93135310
5WSet up a maximum value to
control.
There is no control, because
the upper value is 0 in all
ports.
93145310
5iTurn on the monitoring switch
to display the monitoring
data in real time.
The monitoring switch is
turned OFF. If you use the
real time option for the first
time, turn ON the monitoring
switch.
93155310
5WContinue the work, when you
may change in the state
where it does not control.
The control status will change
to No Control.
93265310
5NTo clear settings on removed
ports, check the Delete ports
if CHA is removed check
box, and then click [Apply].
Settings on removed ports still
remain. To clear the settings,
check the Delete ports if CHIP
board is removed check box
and then select the Apply
button.
93285310
Remote Web Console Error Codes 217