HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 42 Error Codes — Part Code 4105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
70604105
3EAn error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during
server processing. If this
problem persists, call HP
technical support.
71114105
5EIf this problem persists, call
HP technical support.
Unregistered error code.73104105
3ECorrect the specified content,
and issue the request again.
The value you have set
exceeds the available cache
size.
74414105
3ERetry the operation. If you get
the same message again,
reboot the computer. If
necessary, call HP technical
support.
A communication time-out
error occurred.
80014105
6EWait a few seconds, and
then retry the operation.
Communication busy. Retry
later.
80024105
2ECall HP technical support.The SVP version and the DKC
version do not match.
81024105
5EInstall PCBs.No PCBs are installed.86594105
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565244105
3ETo continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
click a function button.
Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
565254105
6ECorrect the settings, and then
retry the operation.
The resources of other SLPR(s)
cannot be accessed.
565264105
6ECheck the settings, and retry
the operation.
The sum of the maximum
values of the PCR capacity
per CLPR does not match the
maximum value of total PCR
capacity.
570074105
6ECheck the settings, and retry
the operation.
The maximum value of PCR
capacity per the specified
CLPR is not multiples of
512MB.
570084105
6ECheck the settings, and retry
the operation.
The capacity of PCR that
each CLPR uses exceeds the
maximum value of PCR
capacity per CLPR.
570094105
186 Remote Web Console for Storage System Messages and Error Codes