HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 40 Error Codes — Part Code 4005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EInstall the required program
product. When an SLPR is
allocated, install a necessary
program product for the
SLPR.
The specified function is not
available because it requires
Cache Residency Manager.
555404005
6EInstall the required program
product.
The specified function is not
available because it requires
Cache Residency Manager
for Mainframe.
555414005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
555424005
3ECheck the setting.An LDEV number that does
not apply to the selected CU
group has been specified.
555764005
6ECorrect the settings, and then
retry the operation.
The resources of other SLPR(s)
cannot be accessed.
565264005
6WSet the prestaging area by
using Cache Residency to use
the prestaging function.
The prestaging is not
executed because the
prestaging area does not
exist. Check the Cache
Residency setting.
565424005
6EWait a few seconds, and
then retry the operation.
The current Cache Residency
setting cannot be changed
because the sidefile size
exceeds the threshold.
585114005
6WWait a few seconds, and
then retry the operation.
The current Cache Residency
setting cannot be changed
because the prestaging
operation is in progress.
Please wait for a while, and
then retry the operation.
585124005
6EWait a few seconds, refresh
the window, and then retry
the configuration operation.
Or check the status of the
disk storage system to find
whether the storage system is
blocked or not. If the problem
persists, call HP technical
support.
Prestaging not completed.585134005
Remote Web Console Error Codes 183