HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 40 Error Codes — Part Code 4005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECheck the settings, and then
retry the operation.
The parity group that contains
the volume(s) to which Cache
Residency is set cannot be
migrated to another CLPR.
Please remove the Cache
Residency settings from the
volumes, and then migrate
the parity group.
CLPR No:%s
552654005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
555304005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
555314005
6ESet the extent area within the
size which can be specified,
and then retry the operation.
The specified extent is over
the size which can be
specified.
555324005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
555334005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
555344005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
555354005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
555364005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
555374005
2EDisable the IO Suppression
mode of this volume, and
then retry the operation, or
remove the volume from the
volumes to be set.
Cache Residency cannot be
set to the specified volume
because the IO Suppression
mode is set to Enable.
555384005
2EEnable the Cache mode of
this volume, and then retry
the operation, or remove the
volume from the volumes to
be set.
Cache Residency cannot be
set for this volume because
its Cache mode is set to
Disable.
555394005
182 Remote Web Console for Storage System Messages and Error Codes