HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 2 Error Codes — Part Code 0002 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3ETo continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
select a function button.
Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
565250002
6ECorrect the settings, and then
retry the operation.
The resources of other SLPR(s)
cannot be accessed.
565260002
2EClick [All Refresh] and refresh
the configuration.
An error occurred in the
storage system. The
configuration may be
inconsistent. Select [All
Refresh] and refresh the
configuration.
585780002
3ECall HP technical support.The Login could not be
performed because a function
failed to start during SVP
initialization.
Call HP technical support.
661000002
Table 3 Error Codes — Part Code 0003
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
You are trying to set multiple
paths to the same volume
from one group.
10030003
6EThe configuration information
has been changed already.
Check the settings, and
request the setting of the
configuration information
again.
Multiple volumes are
specified to a single port,
group or LUN combination.
10040003
6EThe configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The emulation type of the
volumes combined into a
LUSE volume is not for open
systems.
10090003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10100003
18 Remote Web Console for Storage System Messages and Error Codes