HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 39 Error Codes — Part Code 3305 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6WExecute the format processing
for the added volume.
The format processing for the
added volume has not been
executed because the
specified volumes contain
volumes that quick format
cannot be executed Execute
the format processing for the
added volume.
656923305
6EExecute the format processing
for the added volume.
Execute Quick Format after
the system disk is added, or
the blocked System Disk is
restored.
The format processing for the
added volume has not been
executed because there is no
System Disk area for Quick
Format, the capacity of the
System Disk is insufficient, or
the System Disk is blocked.
Execute the format
processing for the added
volume. To execute quick
formatting, execute after the
system disk has been added,
or the blocked System Disk
is restored.
656933305
6WExecute the format processing
for the added volume. The
quick format processing can
be executed after the quick
format processing for other
parity groups has completed.
The format processing for the
added volume has not been
executed because the
number of parity groups
being quick formatted has
exceeded the maximum.
Execute the format
processing for the added
volume. To execute quick
format processing, execute
after the quick format
processing for other parity
groups has completed.
656943305
2ECancel the format or quick
format processing from the
SVP, and then execute the
format or quick format
processing again.
A failure occurred while
formatting or quick
formatting.
656963305
2ECheck the specified volume.The specified volume is not
available to execute VLL
operation (Install CV, Make
Volume, Volume Initialize,
and Volume to Space).
657283305
6ECheck the specified volume
and retry the operation.
The system disk cannot be
set on the specified volume.
657303305
6EThe configuration changing
processes are conflicting at
DKC.
Check if the configuration
changing process by RAID
Manager, XP Auto LUN, or
Quick Restore is not in the
operation, and then retry the
operation.
The configuration changing
processes are conflicting at
DKC.
Check if the configuration
changing process by RAID
Manager, Auto LUN or
Quick Restore is not in the
operation, and then retry the
operation.
657403305
178 Remote Web Console for Storage System Messages and Error Codes