HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 39 Error Codes — Part Code 3305 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECheck the setting.The setting cannot be made
because the specified LDEV
is a remote command
device.
19133305
6ECorrect the settings, and then
retry the operation.
The number of V-VOL(s) has
exceeded the maximum
number of V-VOL(s) that can
be set in a storage system.
19143305
6WCheck the blocked LDEV and
format the LDEV.
The newly added LDEV has
not been formatted. Check
the blocked LDEV and format
the LDEV.
19193305
6ECorrect the settings, and then
retry the operation.
The number of XP Thin
Provisioning volume(s) has
exceeded the maximum
number of XP Thin
Provisioning volume(s) that
can be set in a disk
subsystem.
19223305
2EIf this problem persists, call
HP technical support.
An error occurred during
SVP processing. If this
problem persists, call HP
technical support.
20043305
2EIf this problem persists, call
HP technical support.
An error occurred during
SVP processing. If this
problem persists, call HP
technical support.
20053305
6ECheck the status of the disk
storage system (for example,
the storage system is blocked,
the shared memory is
inconsistent, or some other
problem occurs). If this
problem persists, call HP
technical support.
The status of the storage
system requires maintenance
(for example, the subsystem
is blocked, the shared
memory is inconsistent, or
some other problem occurs).
Call HP technical support.
20113305
6EA communication error
occurs. If the error occurs
after retrying, call HP
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
20153305
2EIf this problem persists, call
HP technical support.
An error occurred during
SVP processing. If this
problem persists, call HP
technical support.
20223305
6EIf this problem persists, call
HP technical support.
To perform a VLL operation
on an external volume, check
the status of the path to the
external volume.
An error occurred during a
VLL operation to add or
delete customized volumes.
Wait for a while, and then
retry the operation.
20813305
172 Remote Web Console for Storage System Messages and Error Codes