HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 37 Error Codes — Part Code 3205 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EReboot the SVP computer,
and retry the operation. If this
problem persists, call HP
technical support.
Failed to update the
configuration information.
Call HP technical support.
89713205
3EAn error occurred on the
DKC side. If this problem
persists, call HP technical
support.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
89783205
5ECheck the emulation type. To
change the cache segment
size to set the specified
emulation type, call HP
technical support.
The specified emulation type
is the type that cannot be
added. To set the specified
emulation type, the cache
segment size must be
changed. Call HP technical
support.
565133205
5ECheck the capacity of the
volume.
The capacity of the specified
volume is less than the
minimum required to perform
the Add LU operation.
565143205
5EReset the configuration
definition of XP Continuous
Access, and then retry the
operation.
The configuration of XP
Continuous Access is defined.
Reset the configuration
definition of XP Continuous
Access, and then retry the
operation.
565163205
5ERelease the setting of XP
Business Copy,
ShadowImage for
Mainframe, FlashCopy
Mirroring, or XP Snapshot,
and then retry the operation.
The Business Copy,
ShadowImage for
Mainframe, Compatible
FlashCopy(R), or XP Snapshot
setting exists. Release the
setting and then retry the
operation.
565173205
5ERelease the reserve volume
setting of XP Business Copy,
ShadowImage for
Mainframe, FlashCopy
Mirroring, or XP Snapshot,
and then retry the operation.
The reserve volume setting of
Business Copy,
ShadowImage for
Mainframe, Compatible
FlashCopy(R), or XP Snapshot
exists. Release the reserve
volume setting and then retry
the operation.
565193205
5ERelease the reserved volume
setting of XP Auto LUN, and
then retry the operation.
The reserved volume setting
of Auto LUN is defined.
Release the reserved volume
setting of Auto LUN, and then
retry the operation.
565203205
5ECheck the setting.The number of XP Thin
Provisioning volumes (TP-VOL)
that can be defined in one
V-VOL group is just one.
677643205
5ERestore the blockage status
of the system disk. If the status
cannot be restored, call HP
technical support.
A volume used as System
Disk is included in the items
to be maintained.
687353205
164 Remote Web Console for Storage System Messages and Error Codes