HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)
Table 35 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WReduce the number of
volumes in the parity group,
and then retry the operation.
Reset operation cannot be
performed because the
number of volumes that can
be created in the parity
group exceeds the maximum.
656473010
0WClick [OK] to return to the
main window.
You are trying to execute
Quick Format to a volume
that does not support Quick
Format. Specify another
volume or select Format.
657113010
5WWhen the status of the LDEVs
in the specified parity group
is other than blocked status,
set it to blocked status, and
then retry the operation.
Some LDEVs in the selected
parity group are not in the
blocked status.
657323010
5WClick [OK].There are CVs where LDEVs
are not specified. Select and
clear the check box for
3390-3R, and then execute
the setting for the LDEVs that
are not specified.
657353010
0WBefore applying the set
contents to the storage, check
that I/O from the host is not
executed.
The blockade instruction for
LDEV can be executed even
in a state that there is I/O
from the host.
Check that I/O from the host
is not executed for the target
LDEV to be blocked.
658033010
6ESee the [Shredding Complete
Confirmation] dialog box of
the HP StorageWorks
XP24000/XP20000 Virtual
LVI/LUN (VLL) and Volume
Shredder User Guide.
The error occurred in
shredding processing.
657523010
6ERetry the operation. If this
problem persists, call HP
technical support.
An error occurred in
Preparing for Quick Format
processing
687633010
5WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
If the unit of display is
changed, the status of the
setting will return to the status
set before. Do you want to
continue?
690293010
5WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The information that is under
setup is not applied to the
device yet. The information
under setup will be cleared
before the Format processing.
Do you want to continue?
690303010
5WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The volume in the Parity
Group set in the following
window is to be processed.
Do you want to continue?
690313010
Remote Web Console Error Codes 157