HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 35 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WClick [OK].There is no specifiable LDEV
number. Probable causes and
solutions are:
• The CU number that can
be specified for the started
SLPR is not assigned.
Contact the storage
administrator.
• All LDEVs in the usable
CU are already used.
• Check whether the LDEVs
are used by another SLPR.
Alternatively, contact the
storage administrator.
550333010
0WCheck the settings and retry
the operation.
There are no volumes that
can be initialized.
552053010
5WReduce the number of
V-VOLs, and then retry the
operation.
No more V-VOLs can be set,
because the number of
V-VOLs exceeds the maximum
number that can be set to the
whole storage system.
555883010
5WApply the Install CV setting,
and then retry the Install CV
setting.
Only up to 16,384 LDEVs
can be set when you apply
the Install CV setting once.
You can only set another %s
LDEVs because the number of
LDEVs that can be set in a
VDEV is more than the
number of LDEVs that can be
set by Install CV setting one
time.
555953010
0WClick [OK].The format processing, the
shredding processing, and
the prepare for Quick Format
are not executed.
556353010
0ERequest HP technical support
to execute the interrupted
processing and complete it
successfully from the SVP.
The processing for adding or
deleting LDEV remains
interrupted. Call HP technical
support and request to
execute the interrupted
processing and end the
processing normally from the
SVP.
556373010
Remote Web Console Error Codes 155