HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 35 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WReduce the number of
volumes in the parity group,
and then retry.
Volume Initialize cannot be
performed because the
number of volumes that can
be created in the parity
group is exceeded.
50583010
5WEnter the correct value.The setting capacity in the VLL
operation is outside the
setting range. Set the
capacity within the specified
range.
50603010
5WEnter the correct value.Set the number of cylinders
used for VLL operation to 50
cylinders or more.
50613010
5WEnter the correct value.LDEV Creation failed because
the specified capacity was
invalid.
50623010
5WDo not contain LUSE at the
time of more than one choice.
The LDEV capacity is not
specified.
50633010
5WSpecify LDEV capacity
correctly.
LDEV capacity is not
specified.
50643010
5WSpecify the number of LDEVs
correctly.
The number of LDEVs is not
specified.
50653010
5ECheck the content of the
operation.
The specified size or number
is invalid.
50663010
5ECheck the content of the
operation.
No write data is entered in
the [Define] text box.
58703010
5ECheck the content of the
operation.
The number of entered
characters is odd. Enter even
number of characters.
58713010
5ECheck the content of the
operation.
The number of times of
writing cannot be set larger
than 8.
58723010
5ECheck the content of the
operation.
Last data cannot be deleted.58733010
2ECall HP technical support.An error occurred in the client
logic.
70603010
2ELog off from Remote Web
Console. Then log on to
Remote Web Console again
and check the whether
configuration changes have
been made correctly.
If the configuration changes
have been made correctly,
there is no problem.
If the configuration changes
have been made incorrectly,
retry the operation.
An error occurred regarding
screen display. Log off from
Remote Web Console. After
that, log on to Remote Web
Console again and check
whether configuration
changes have been made
correctly.
74403010
Remote Web Console Error Codes 153