HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 35 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the content of the
operation.
Execute any of the
corresponding items below
before deleting LDEV:
However, LDEV cannot be
deleted when it is a remote
command device.
• delete the paths
associated with the LDEV.
• release the LUSE volume.
• release the reserved
volume of Auto LUN.
• remove the Volume
Security settings from the
volume.
• set the access attribute of
the LDEV to read/write.
• release the Pool settings
from the volume.
• release the JNL settings
from the volume.
• release the quorum disk
settings from the volume.
50543010
5WCheck the content of the
operation.
There is no volume to be
initialized.
A volume cannot be
initialized when it is:
• defined with a path or
paths,
• used as a LUSE volume,
• reserved for Auto LUN,
• paired with another
volume,
• set as a command device,
• used for Volume Security,
• not read/write-enabled,
• used as a Pool volume,
• used as a JNL volume,
• used as a remote
command device volume,
or
• used as a quorum disk.
50553010
5WCheck the content of the
operation.
Select LDEVs after canceling
the automatically selected
LDEVs.
50563010
5WCheck the content of the
operation.
There are not enough LDEVs.50573010
152 Remote Web Console for Storage System Messages and Error Codes