HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 34 Error Codes — Part Code 3005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ESelect only the volumes that
quick format can be executed
and execute quick format.
The specified volumes contain
volumes that quick format
cannot be executed. Select
only the volumes that quick
format can be executed and
execute quick format.
656923005
6EAdd the System Disk, or
restore the blocked System
Disk, and then retry Quick
Format.
Quick format cannot be
executed. There is no System
Disk area for Quick Format,
the capacity of the System
Disk is insufficient or the
System Disk is blocked.
656933005
6EChange the setting or execute
the quick formatting process
after the other parity groups
have completed the quick
formatting process.
Quick format cannot be
executed because the number
of parity groups being quick
formatted has exceeded the
maximum. Change the setting
or execute the quick
formatting process after the
quick format processing for
other parity groups has
completed.
656943005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
656953005
6ESelect only the volumes that
can be formatted and format
the volumes.
The specified volumes contain
volumes that cannot be
formatted. Select only the
volumes that can be
formatted and format the
volumes.
657173005
6ECheck the specified volume.The specified volume contains
a quorum disk.
657673005
6ECheck the specified volume.The specified volume includes
a remote command device
being used by a mirror of the
journal group.
657903005
6ECheck the setting of the
specified volume.
The specified volume is not
an XP Thin Provisioning
volume.
687223005
6ECall HP technical support.An internal logic
contradiction occurred on the
DKC side.
687233005
6EInstall the shared memory.Shared memory is not
installed.
687243005
6EDelete the unnecessary XP
Thin Provisioning Pool (TP
Pool) and XP Thin
Provisioning volume (TP-VOL),
and then retry the operation.
If this problem persists, call
HP technical support.
The shared memory for the
V-VOL management area is
insufficient. Delete the
unnecessary XP Thin
Provisioning Pool (TP Pool)
and XP Thin Provisioning
volume (TP-VOL), and then
retry the operation.
687253005
146 Remote Web Console for Storage System Messages and Error Codes