HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 34 Error Codes — Part Code 3005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECheck the setting of the
specified volume.
The specified volume is used
as a System Disk volume.
656503005
6ECheck the setting of the
specified volume.
The specified volume is used
as an XP Thin Provisioning
volume.
656593005
6ERelease the association of the
pool volume and the XP Thin
Provisioning volume included
in the items to be maintained.
The pool volumes associated
with the XP Thin Provisioning
volume is included in the
items to be maintained.
Release the association of the
pool volume and the XP Thin
Provisioning volume included
in the items to be maintained.
656713005
6ECheck the setting and the
status of the LDEV in the
specified parity group.
The LDEV to be operated is
not included in the specified
parity group. Check the
setting and the status of the
LDEV in the specified parity
group.
656753005
6EConfirm that it is associated
with a pool in the same CLPR.
The association cannot be
made because the pool is in
a different CLPR.
656763005
6ERelease the paths, and then
retry the operation.
The association cannot be
released because paths are
defined to the target volumes.
656773005
6ERelease the LUSE setting, and
then retry the operation.
The association cannot be
released because a LUSE
setting is made on the target
volumes.
656783005
6EMake sure that the volumes
are not reserved for XP Auto
LUN, and then retry the
operation.
The association cannot be
released because the target
volumes are reserved for Auto
LUN.
656793005
6WAssociate or release LDEVs in
the V-VOL groups.
The operation failed because
some V-VOL groups cannot
be associated or released.
656803005
2ECancel the format processing
from the SVP, and then retry
the formatting processing
again.
A failure occurred while
formatting.
656883005
2ECancel the quick formatting
processing from the SVP, and
then execute the quick
formatting processing again.
A failure occurred while
quick formatting.
656893005
6ECheck the settings and retry
the operation.
The specified volumes contain
volumes that are being quick
formatted. Check the settings
and retry the operation.
656903005
6ECheck the status and wait
until the status changes to a
state that allows
maintenance.
Preparing for quick format.
Check the status and wait
until the status changes to a
status that maintenance is
possible.
656913005
Remote Web Console Error Codes 145