HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 34 Error Codes — Part Code 3005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EDelete the XP Snapshot pairs,
and then retry the operation.
V-VOL management area is
being used.
Delete the XP Snapshot
pair(s), and then retry the
operation.
585703005
6ECheck the pool-VOL setting.The specified operation
cannot be executed because
the Pool-VOL is not mounted.
585713005
2EWait awhile, and retry the
operation. If the error
occurred in the operation of
the pool, initialize the V-VOL
management area, refresh
the configuration by clicking
[Refresh All] on the File menu,
and retry the operation.
An error occurred during the
communication with the
storage system. Wait awhile,
and retry the operation.
If the error occurred in the
operation of the pool,
initialize the V-VOL
management area, refresh
the configuration by clicking
[Refresh All] on the File menu,
and then retry the operation.
585723005
3ECheck whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
This function is not supported.585733005
6EIf this problem persists, call
HP technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585743005
6EIf this problem persists, call
HP technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585753005
3EIf this problem persists, call
HP technical support.
A communication time-out
error occurred in the storage
system. Wait for a while, and
then retry the operation.
585763005
6EResynchronize the pair or
release the pair definition,
and then retry the operation.
The specified operation
cannot be performed,
because the XP Snapshot pair
using the pool volumes to be
maintained is in PSUS status
or being restored. Please
resynchronize the pair or
release the pair definition,
and then retry the operation.
586233005
6ECancel the pair definition,
and then retry the operation.
An XP Snapshot pair is
defined. Cancel the pair
definition, and then retry the
operation.
586263005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing.
If this problem persists, call
HP technical support.
587063005
144 Remote Web Console for Storage System Messages and Error Codes